-
May 22nd, 2007, 03:55 PM
#1
trigem lomita
I have a emachine 1220 that needs another trigem lomita motherboard. I need help finding a good place to buy this board.
-
May 22nd, 2007, 08:25 PM
#2
Registered User
Last edited by xpuser357; May 22nd, 2007 at 08:36 PM.
Reason: Found more
-
May 23rd, 2007, 06:54 AM
#3
Registered User
We never replace e-machine boards with original types as in our experience they will undoubtedly fail again!!!!! 27 so far this year, 66 during 2006! all Trigem - made Intel boards, various models / sockets / ages, and all with major issues on the power side, mainly switching on and off twice a second after shutdown (until the PSU gives up & dies) or simply locking up and blowing the fuse and / or PSU on shutdown..... Never had any processor, RAM, hard / optical drive issues yet, these always seem to survive OK
In all cases we search out a compatible board - Asrock is our preferred, far more reliable. Most midi ATX boards with the same cpu socket will be compatible, though a repair install will be needed if the chipset is different (which it probably will be). With older e-machines you won't be able to connect up the front audios but the front usb's are always fine. Later models have a standard audio header so no prob.
You should replace the PSU as well as even if it still works it will have been damaged.
No surprise then that we don't recommend e-machines
John
Now where did I leave my Lump Hammer?
"I thought I was wrong once" - "But I was wrong"
Similar Threads
-
By evil in forum BIOS/Motherboard Drivers
Replies: 1
Last Post: August 28th, 2006, 01:45 PM
-
By jyates in forum BIOS/Motherboard Drivers
Replies: 8
Last Post: February 12th, 2006, 09:39 AM
-
By lizalias in forum BIOS/Motherboard Drivers
Replies: 3
Last Post: December 18th, 2005, 03:20 AM
-
By jakkwb in forum Tech-To-Tech
Replies: 3
Last Post: August 31st, 2005, 09:11 PM
-
By jakkwb in forum Tech-To-Tech
Replies: 2
Last Post: March 1st, 2004, 09:48 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks